A cost-effective design with a rubber OD, one sealing lip and no garter spring. It has a low friction coefficient and is thus suitable for sealing against viscous fluids and lubricants.

This design is good for sealing liquids under pressure.

Recommended for sealing heaviliy soiled surfaces and low working rotations.

A type with a rubber OD. The additional lip on the side is designed to operate upon contact with vertical mechanical plains to assure dirt exclusion and keep foreign substances away. The rest of its characteristics are identical to those of type AS.

This type features two sealing lips and two garter springs. It is used to separete two different liquid media.

Same features as those of type AS with the addition of a grooved OD, which is suitable to accomodate big thermal expansion of the housing seat. Designation accoding to the DIN standard is ASW.

Inwardly oriented dust lip design, which is good for curved axle journal or other special structures. It also features grooved OD for housing seats with significant thermal expansion.

Same like general purpose seals of type 122 (type A intended for sealing liquids under pressure), except for its external lip. This type is especially designed for sealing rotating housings, e.g. front wheel hubs, etc.

A cost-effective design with a metal OD and rubber on the inside, with only one sealing lip and no garter spring. It has a low friction coefficient and is good for sealing out viscous fluids and lubricants.

This type combines some of the advantages of type BS, especially its high extraction force, with the perfect sealing qualities on the OD represented by type AS. Designation according to DIN - A/BS.

Same features as those of type 214, with the addition of a grooved outside diameter, suitable for housing seats with big thermal expansion. Designation according to DIn - A/BSW.

This is a type with a metal OD. The additional lip on the side is designed to operate upon contact with vertical mechanical plains to assure dirt exclusion and keep foreign substances away. The rest of its characteristics are identical to those of type BS.

Same features as those of type BS with the addition of a special configuration of the outside surface with a locating lug (flang) for easier installation and replacement.